... | ... | @@ -65,9 +65,28 @@ Some operations are applied to the selected component(s). In these case, the con |
|
|
|
|
|
An axis is edited through 3 successive phases :
|
|
|
|
|
|
1. **Definition :** define the type, direction, position of the axis
|
|
|
2. **Calibration :** define the median value (*ie* the zero value) and the min/max limit values
|
|
|
3. **Link :** link the axis with the corresponding Nomad controller
|
|
|
1. **Definition :** Define the type, direction, position of the axis.
|
|
|
2. **Calibration :** Define the median value (*ie* the zero value) and the min/max limit values.
|
|
|
3. **Link :** Link the axis with the corresponding Nomad controller.
|
|
|
|
|
|
If the hierarchy of the components does not suit the axes, it must be recreated. Then we select a set of components that will move "together". See the next paragraph on the edition of components.
|
|
|
|
|
|
Note that for the edition, a component must be selected.
|
|
|
|
|
|
#### Edit an axis
|
|
|
|
|
|
1. Select a component, then the axis to be edited is the one of the component.
|
|
|
2. Edit > Axis > Modify Axis
|
|
|
3. Set the type. If rotation is selected, give a value to y (e.g. 1). Then the axis can move with mouse. Type *enter* to apply the new value.
|
|
|
4. The rotation direction has to be checked and Reverse axis may be applied.
|
|
|
5. The center of the axis must be set. It can be automatically set to the center of the bounding box. A violet vector appears and can be moved.
|
|
|
Note: When the position of the camera is moving, the position of the axis does not move visually but really moves.
|
|
|
Note: If a translation is selected the vector is yellow.
|
|
|
6. Edit > Axis > Calibrate Axis
|
|
|
7. Set median value, then the position becomes 0. Some limits can be set (optional).
|
|
|
8. Edit > Axis > Link Axis
|
|
|
9. Select an axis.
|
|
|
Note: The actual position is read once the window is open.
|
|
|
|
|
|
### Configurations
|
|
|
|
... | ... | |